Thursday, May 5, 2016

Fly Tying- Week of 5/2/16

This week I decided to take on the "Stip-A-Bou" leech pattern as shown by Pat Cohen on his YouTube page.  I tied this pattern in black and olive with a double weed guard.

Material List-

Gamakatsu B10S #2
Black Maribou
Olive Maribou
Danville 210 black
Yellow painted dumbbell eyes
White/black grizzly rubber legs
Black over olive zonker strips.
Weed guard is 50# mono

Attach dumbbell eyes as shown.  This fly will ride hook point up.  Double weed guard attached as well.
 I apologize for skipping a few steps.  Full link to the video here:
Zonker strip, and black maribou started with rubber legs separating the two colors of maribou.

Starting to look more like something.

After tying in weed guards up front, leave some tip to melt down and press into the thread.  This will prevent slipping.

Last step is to trim the legs.  I leave them attached to make finishing the fly easier.

"Official" bath tub test.


Monday, April 18, 2016

Fly Tying- Week of 4/18

With all the buzz of the Northeast having a big Cicada infestation in the next couple months, I decided to start tying some OPC Cicada bugs.  

Freshly carved cork.  Added the rubber legs and weed guards and attached to hook shank via super glue. 

Front view of the bug

Traced the outline of a tail against fly foam and cut to specs.  I had to do this a couple times to get the exact size and shape.  

Painted twice, two coats of epoxy and tied in the weed guards.  The weed guards are 50# mono so I can throw this in the junk where cicadas fall.

Backed up epoxy over weed guard tie-in and a little more paint.  

I'm going to be making slightly smaller sizes of these for the river.  These measure about 3" in length from hook eye to tail but they are bulky.  Best suited for ponds, lakes and reservoirs.  


Friday, March 25, 2016

Military Surplus Rifles and Their Well Deserved Place Among Modern Hunting Rifles

Here is a great article from Ryan.  Hope you enjoy!

Military Surplus Rifles and Their Well Deserved Place Among Modern Hunting Rifles
So often in today’s hunting and shooting communities, the discussion and reviews are about all of the new weapon platforms that are being introduced to the market. Whether its events like SHOT show or the Great American Outdoor Show, people tend to focus on what is new and trending in the market. The problem here is the high price that often times is associated with all of the newest technology.
While a lot of people prefer to have all the newest hunting gear, their socioeconomic status may not allow for that. So many of today’s rifles are all about the polymers, plastics, and optic mounting and often look past the foundation of hunting: being able to put a well-placed shot on your target. In addition to that, with all of the new modern amenities, come higher price tags. The rifles that are targeted towards the lower end market are often substituted with lower quality craftsmanship and lower end materials (i.e., press in vs threaded in barrels, mass produced plastic vs. walnut stocks).
A lot of shooters have turned to the military surplus market to help fill this void. Rifles from around the world that were produced and stored away for a potential conflict that never happened are readily available now that many countries are selling off their inventory of older military rifles in order to bring in modern weapon systems for their soldiers.
The military surplus or “milsurp” market is booming right now with companies that are importing these vintage war horse rifles and dozens others are the making affordable accessories to help them reach their maximum capability. One of the common constraints collectors have is that any modification they make, they must be able to return the rifle to its original military configuration for the collectability aspect.
Some things to consider when making the decision about using a milsurp as a hunting rifle are listed and explained below:
1.     For a hunting rifle, what overall condition will you be happy with? (These rifles range from seeing service in several military conflicts to having never been fired.)
2.      How readily available is the caliber in which it’s chambered? With budget in mind, it doesn’t make sense to buy a cheap rifle that shoots ammo that’s hard to find and more expensive than your standard factory loads.
3.      What is the realistic range that I’m going to shoot this rifle and in what environment?
Among the leaders on the milsurp market are the mausers from various countries (South American and Yugoslavian mausers can be found from around $100-$250. The Russian surplus rifles also have a massive following given there were nearly a billion rifles made in several different configurations. These rifles depending on the model and condition can range from $100-$1,000.

Throughout this series I will review a few different types of common military rifles as well as a few that have been modified heavily to show the range which is available to someone wanting a high quality rifle with a little history behind it. So Stay Tuned!


Thursday, March 17, 2016

Welcome Back?

Admittedly, I got a little overwhelmed when I started working on this blog.  I saw other blogs that were very well established and thought that I immediately needed to do the same.  In my mind, it didn't matter that some of them had been established for upwards of 5 years.   I started posting every day, eventually running out of "quality" material and ideas.  My last post was July 6th of 2015 and my goal for the remainder of 2016 is to post one quality review, article or update every week.

Ryan will be working more on firearm/ammo reviews as well as contributing with articles on his firearm builds and restorations.  Keep an eye out for a 3 part update on an awesome Venezuelan Contract Mauser project from him.

I have been busy spending time with my son (now 15 months), watching him grow and experiencing all of his firsts.  Its been an amazing time for my family.  He has been the best excuse I could imagine for not getting out for the hunting seasons as often as prior years.  The 2015-2016 deer season ended up being the second straight year I did not kill a deer.  I shot a few ducks on the river out of my kayak, shot some more at one of my favorite public lands in MD and enjoyed the few times I got to get out.  In a few weeks, I will be back on the Eastern Shore getting after turkeys on my lease, then heading out to Western MD with Ryan to chase the mountain gobblers like we started to do last Spring.  After my son goes to bed, I've been busy tying flies and working on carving OPC poppers. I attended The Fly Fishing Show on 3/5/16 in Lancaster, PA and I pretty much have top-water and sub-surface flies ready to go.  Now I just need to work on the bottom of the water column.

Anyways, as I mentioned before, I am going to try to have fun with this page as was originally intended and not feel pressured.  I will post reviews when I can, update more fishing trips and reports as they happen and maintain consistency in posting.  Hope you all enjoy 2016 as much as I know I will.  I have been active on Instagram (@skyanger) during the blog hiatus, so please check me out over there as well.


Here are some streamers I've been working on in the evenings.  I've been steadily adding more materials to my arsenal and trying to learn a new fly every week.  Below are some baitfish imitations including some "Hollow Fleyes" on the right.  Amazing action in the water!

Below is my new Allen Fly Fishing Alpha III Reel.  It will be paired with an 8-weight Allen Compass Rod to get those big streamers where they need to go.

Monday, July 6, 2015

Reuse and Repurpose

My company is the leader in sustainability and green practices in our industry.  We have prided ourselves of this accomplishment since the late 60's when the company was established.  Recently, my OPC's were featured in our newsletter highlighting our sustainability and how the employees incorporate these practices in their personal lives.

This is a short write-up of the flies I tie using re-purposed wine corks.


Monday, May 18, 2015

Fishing Report 5/3/13

Let's compare this fishing report from 2013 to the same week 2015.  That'll come in tomorrow's post.

Monday, April 27, 2015